電纜警示樁的現場布置有要求,這樣才能讓施工質量得到保障,讓施工之后的警示樁發揮出該有的作用,下面小編為您講解相關內容。
The site layout of cable warning piles has requirements, so that the construction quality can be guaranteed and the warning piles after construction can play their due role. The following sections will explain the relevant contents for you.
埋深要求:人行道時電纜標志板應與地面保持水平。草坪地時高出地面5CM。
Burial depth requirements: the cable sign board shall be kept level with the ground when walking on the sidewalk. The lawn is 5cm higher than the ground.
電纜通道直線段電纜標志樁、板每隔15米埋設1塊標志樁。
One marker pile shall be buried every 15m for the cable marker pile and plate in the straight section of the cable channel.
埋設電纜每個轉角處應根據相應符號埋設1塊電纜標志樁。
One cable marker pile shall be buried at each corner of the buried cable according to the corresponding symbol.
電纜中間每處接頭都應埋設1塊電纜中間頭標志樁。
Each joint in the middle of the cable shall be buried with a marker pile at the middle of the cable.
電纜交叉、轉彎處每隔5-10米裝設警示樁,電纜進出工井、隧道及建筑物時,應在出口兩側裝設警示樁。
Warning piles shall be installed every 5-10m at cable crossings and turns. Warning piles shall be installed on both sides of the exit when cables enter and exit the shaft, tunnel and buildings.
電纜通道警示樁材質及制作工藝:電纜通道標識板(牌)材質:用250#混凝土預制,標志符號用紅漆圖刷。
Material and manufacturing process of warning pile for cable channel: material of cable channel sign board (plate): prefabricated with 250 # concrete, and the sign symbols are painted with red paint.
電纜通道警示樁(標志樁/板)內容:電纜通道內應加裝電纜標志石或標志板,應有電纜轉角標志、中間接頭標志,電力警示標志等,標識石與標識板內容不同,但都要求有電力電纜嚴禁挖掘、高壓危險字樣和電纜走向和類型標志,可參考電纜施工圖紙要求。
Content of warning post (marker post/plate) for cable passage.
The above is the answer to the question. If you have any questions, please come to our website http://m.tianyals.cn have a look!